5. Be very, very careful! The Original Placticine model is destroyed in the removal from the mould! The mould is re-assembled and the Bronze/Resin ‘Mix’ can be poured, again taking care to remove all the air bubbles.
Getting the curing time right was critical. Too fast or too slow and the ‘mix’ would go off before the mould was poured, resulting in the loss of the model forever.
6. Final Touches. After a ‘ Successful Pour’ A model ‘ In The Rough’ is ‘ Revealed’ Which is then cleaned of any imperfections. The Model can then have a Patina added giving the final product the same ‘look’ Exactly as if made like a Traditional Bronze.
